Lighting issues!!!!!!!!

[BLAZINM3]

So I got led bulbs all around from ddm there badass brightest ones they had I hooked them all up and they worked with the exception of the brake light. played with it a bit till it worked but then when I put the ones for the plate in the right tail light went out completey unplugged the housings power plug and plugged it back in. got the brake light working but nothing else on that side...... Plzzzz help!

[sacal98m3]

check the fuse, i did my led light for my plates and it blow my fuse, you may need a larger amp to support it

[K3VIN]

check the fuse, i did my led light for my plates and it blow my fuse, you may need a larger amp to support it

+1, definitely try that. I have not done leds yet but i have read that you would need a larger amp also. Good luck!

[LWRNCE]

OP kinda hard to understand your post lol. All of my lights are LED and I have never had to bump up on fuses. LED uses less power than your standard halogen so going up on fuses is a waste. Check all of your connections... You may have a bulb installed incorrectly with the negative to the positive or positive to the negative.

The only time you have to bump up on fuses are for the ballast. It takes more power on the initial fire up but the uses less power than your stock halogens.

Btw they should have supplied you with resistors. Ümnitza does with their kits that is who does all of my lighting and I have had no problems at all.

[BLAZINM3]

The issue was resolved had a few lights flipped the wrong way and a blown fuse but we are all bling now! Just gotta throw in those resistors to slow my turn signals down! Thanks for the help guys!

[pacific808]

Post some daytime and nighttime pics. I am curious how they look all around. You have stock lenses?

[BLAZINM3]

Very happy hpw it turned out! Matchs up to my hids and angel eyes perfectly not to mentiomn the reverse light makes it even sicker

[1SikhE36]

I'm havin problems with my led lights too.. my blinlers are going crazzy.. where can i buy some resistors.. an do I need them for the fronts only or the sides too

[BLAZINM3]

Ddm/ eurodyne offer a pair of gold 55w resistors. Not sure on if u need them all around yet... Still havent installed mine. Fail

[1SikhE36]

Just got mine in today.. an the sides don't matter u just need them in the front.. they work great an look a lot cleaner with a slow blink rather then that ricer hyper blinker befor..

[Joseph]

Post some pics of the LED reverse light. :)

[BLAZINM3]

...stilll failing on taking pics sorry! Tonight I will try!