SoCal M5 needed for product testing

[Chase M3]

EDIT: Ill throw in a free system if it proves it works!


Going to make a long story short and get right to the point. Had a intake system designed and welded up. The M5 this was done on no longer is able to test.. (photo below)

I had someone lined up to get the system tested and see if it was worth the time for the shop I went through to manufacture. Unfortunately they have had a issue with their car and can no longer test.

The intake I have gotten word from is 100% done! Just needs a dyno, already had it tested fitted and built of my current M5. For obvious reasons Id prefer someone LOCAL to Southern California and who will be available to dyno (paid by me both times, 0 zero cost to you) a baseline and then have me install the system wait a week while you drive around a tank or two and come back for another dyno.

Dyno will be on a DynoPak. This is non negotiable. There is Zer0 cost to you other than your time which I will gladly reimburse you with great food. I will need to dis install the intake after the 2nd dyno, the great point of this system is it connects OEM! No cutting ect. of anything in your car!

Please PM or Email me at G3networking@gmail.com

Best Regards,
Chasen


[/quote]

[DennisCooper!]

Hi

You forgot to include the pic !! so I'm thinking E28? E34? E39? E60 ?!

Will this be a custom made intake that's being manufactured in the USA? any more pictures? how've you developed the product? any help from things like motorsport teams? engineering companies who supply the motorsport industry or trade? - ie, what sets you're product apart from other solutions?!

I also live in the wrong country! ahh, to be blatting about in an M5 in California where the suns always shining and the petrol is cheappp !

Cheers, Dennis!

[Laidback]

+1:)Hi

You forgot to include the pic !! so I'm thinking E28? E34? E39? E60 ?!

Will this be a custom made intake that's being manufactured in the USA? any more pictures? how've you developed the product? any help from things like motorsport teams? engineering companies who supply the motorsport industry or trade? - ie, what sets you're product apart from other solutions?!

I also live in the wrong country! ahh, to be blatting about in an M5 in California where the suns always shining and the petrol is cheappp !

Cheers, Dennis!

[Chase M3]

Hi

You forgot to include the pic !! so I'm thinking E28? E34? E39? E60 ?!

Will this be a custom made intake that's being manufactured in the USA? any more pictures? how've you developed the product? any help from things like motorsport teams? engineering companies who supply the motorsport industry or trade? - ie, what sets you're product apart from other solutions?!

I also live in the wrong country! ahh, to be blatting about in an M5 in California where the suns always shining and the petrol is cheappp !

Cheers, Dennis!

Dennis,

I have posted this in the E60 M5* section so yes this kit is for a E60 M5.

As of right now there are no plans for it as I don't know if it will even work!

The shop that developed and designed the intake is well respected for race fabricating. His primary business is contracting for teams globally on fabrication of products.

I think you all can understand that I would rather be as secretive as I can with this system as it is VERY different than what is out on the market.

Please EMAIL or PM me for further details. I do have a day job so I will get back to you later in the day! I have photos but again I would like to keep them secretive. The system is complete and sitting at the shop if someone is interested in checking it out first.

Photo of the M5 that it was designed on and sadly is not able to test :(

http://i693.photobucket.com/albums/vv292/AlwaysDesigns/IMG00525-20110617-0921.jpg

[BMW]

Aww man look at that M5. Sucha waste

[E46transforM3r]

:eek: Ouch :facepalm:

[Laidback]

Is this the Agency Power intake?

[Chase M3]

Is this the Agency Power intake?

Nope, this is a one off made by B-Line Motorsports. Right now its sitting on a Volk collecting dust..

Any one local? Chris?!

Email or PM me and I can send a photo through email!

[Laidback]

Oh ok, let me see wht we can help out with, whats the turn around time or how long do u need the car for?


Nope, this is a one off made by B-Line Motorsports. Right now its sitting on a Volk collecting dust..

Any one local? Chris?!

Email or PM me and I can send a photo through email!

[Chase M3]

Oh ok, let me see wht we can help out with, whats the turn around time or how long do u need the car for?

I would need the car to be dyno'd @ Church Auto in Wilmington, CA (baseline)

After Ill install the system and send you off, in a weeks time come back and do another dyno. (results)

So roughly a week's time of having the intake on! about 3 full hours over all maybe less depending on how hot it is!

shoot me a PM for my contact #
I am working full time for my day job but always give voice mails/missed calls a ring back!