RPI Stage 2 Mexico Run 12-7-08

[Rab Dog]

Here ya go guys Mexico run this morning with RPI Stage 2's

YouTube - E60 M5 RPI Stage 2 Mexico run.wmv

[myke951]

Nice run! 600hp beasts! Dyno proven! al motor! 5.0L with 600hp is amazing in my opino!

[Laidback]

That is S!cK!:eek:

[NeRwEEzy]

niiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiice =)

[roxxxstr]

Great videos! I've been wanting to see this race for awhile with your RPI beast.. Thank you!

[Rab Dog]

Great videos! I've been wanting to see this race for awhile with your RPI beast.. Thank you!

Thanks hopefully on our next Mexico run you can join us!

[Orange fever]

Nice runs.....

[nismo skyline]

sounds gooood!

[Laidback]

470 rwhp on Dyno Dynamics:eek: we need to find a Stroker car from Dinan asap:D

Rob hope you and the guys can come out to the bbq on Sunday at VF:clap:

[Bimmerlifestyle]

nice

[MPower82]

Vegastrashed and myself were at the Mexico run also.

These cars are like 2 silver bullets. The acceleration is unbelievable. We were discussing running one of these monsters against a stock M5, just for measure. I predict that from a 2nd gear roll up to 160, it would be about 15 cars! Any volunteers?

[Laidback]

I'm sure Greg (g24) will come out:D

But since everyone knows that with just the RPI scoops that it can pull on a stock M5 why do the comparison:confused: why not bring a VF S/C M3, HPF M3 or a Dinan E60 M5 stroker or a Evosport E60 M5 ...also there will be a dyno day at the meet on Sunday it'll be cool to see all the BMW models dyno at the same day..


Vegastrashed and myself were at the Mexico run also.

These cars are like 2 silver bullets. The acceleration is unbelievable. We were discussing running one of these monsters against a stock M5, just for measure. I predict that from a 2nd gear roll up to 160, it would be about 15 cars! Any volunteers?

[Rab Dog]

Vegastrashed and myself were at the Mexico run also.

These cars are like 2 silver bullets. The acceleration is unbelievable. We were discussing running one of these monsters against a stock M5, just for measure. I predict that from a 2nd gear roll up to 160, it would be about 15 cars! Any volunteers?


Eddie I totally aggree and will put money on 15-cars with a stock E60 M5. When me and you were messing around I put easiely 6-8 cars on you out of 3rd gear and your car is running strong after the RPI exhaust, pulley and block off plates. Next for your is software will really help your drivability on increase on top end..

Im gonna try to make it out to the BBQ at VF and put my car on a Dyno Jet to see if the beast can break that 500hp mark!! :D

[MPower82]

I'm sure Greg (g24) will come out:D

But since everyone knows that with just the RPI scoops that it can pull on a stock M5 why do the comparison

from there we can compare with youtube video of stroker vs stock m5. In addition, all of us can really see what RPI mods really put down, and how they have improved an already awesome machine.
The Dinan guys are all talk, we called a couple out and none showed. I ran Rab Dog and keang24 like 2 times on the freeway just for fun, and they got me by 6 lengths both times.

During these runs Rab Dog got some times on the vbox, 60-130 in 9.3 seconds. If he really focuses I believe they can come down to 9.1, which is right on point of the Dinan Stroker.

[Laidback]

Dyno!!!!:clap:

Eddie I totally aggree and will put money on 15-cars with a stock E60 M5. When me and you were messing around I put easiely 6-8 cars on you out of 3rd gear and your car is running strong after the RPI exhaust, pulley and block off plates. Next for your is software will really help your drivability on increase on top end..

Im gonna try to make it out to the BBQ at VF and put my car on a Dyno Jet to see if the beast can break that 500hp mark!! :D



Wait for Mfest 3;) ... i invited a guy with a M6 stroker and hopefully we'll see the Gpower S3 M6 that SouthBAy Autohaus is looking into doing very soon (aside from that we'll see VF e46 s/c S3, HPF Turbo'd S4 and The E9X stroler from RD sport and S/C from VF engineering...and hopefully we'll get the drag strip and the track aswell with all the heat were bringing:D...



from there we can compare with youtube video of stroker vs stock m5. In addition, all of us can really see what RPI mods really put down, and how they have improved an already awesome machine.
The Dinan guys are all talk, we called a couple out and none showed. I ran Rab Dog and keang24 like 2 times on the freeway just for fun, and they got me by 4 or 6 lengths both times.

During these runs Rab Dog got some times on the vbox, 60-130 in 9.3 seconds. If he really focuses I believe they can come down to 9.1, which is right on point of the Dinan Stroker.

[g24]

Must have Stage II RPI now.

[Laidback]

we will see these beast on the 14th at the bbq:drool:

[Rab Dog]

we will see these beast on the 14th at the bbq:drool:

Chances are good the RPI beast will be by on the 14th... But will be there early too Dyno around 9am then zip on out hope you guys dont miss it!!

[Laidback]

I'll talk to the guys from VF and see if they can strap the monster early;)Chances are good the RPI beast will be by on the 14th... But will be there early too Dyno around 9am then zip on out hope you guys dont miss it!!

[415Banker]

I thought Kenny's was fast already after the drive up to Santa Barbara...but after seeing this video....oh man, Rab's E60 made my pants wet!

[Rab Dog]

I thought Kenny's was fast already after the drive up to Santa Barbara...but after seeing this video....oh man, Rab's E60 made my pants wet!

LMAO!!! Well now I know not to ever give you a ride in my passenger seat!!!

[Gt28AudiS4]

does any one on here have a car thats puts downs over 700whp?

[Laidback]

But of course we do have some here...

YouTube - HPF Stage 4 E46 M3 902rwhp at HorsepowerFreaks does any one on here have a car thats puts downs over 700whp?

[rated m]

Rab...nice meeting you and the crew; Joe and Eloy from RPI, Joe from Trinity along with Gabriel and Jeremy! I had a great time at RPI Friday afternoon taking a listen, drive and in-depth comparison of your M5 beasts and their RPI modded power upgrades (and LACK thereof in my case!). We looked at dyno sheets, made short burst runs around the shop streets in the two RPI M5s and in the end, the RPI products sold themselves!!
By Christmas week I will have followed in yours and Kenny's footsteps and will have A FULL RPI power modded M5.....Make room for another car to run with, Mexico/241/133.....it'll be great....

:launch: :excited:

To be installed:
RPI Headers
RPI Section 1, 2 and 3 (full GT race / straight pipes)
New RPI pulley
RPI Oil cooler
RPI Stage 2 ECU remap
:drive2:

Already completed:
RPI scoops
RPI Block off plates
BMC filters

For Sale Soon:
M5 Meisterschaft section 3 exhaust w/carbon fiber tips
EvoSport underdrive pulley system

[NeRwEEzy]

great mods Todd =)

[Rab Dog]

Rab...nice meeting you and the crew; Joe and Eloy from RPI, Joe from Trinity along with Gabriel and Jeremy! I had a great time at RPI Friday afternoon taking a listen, drive and in-depth comparison of your M5 beasts and their RPI modded power upgrades (and LACK thereof in my case!). We looked at dyno sheets, made short burst runs around the shop streets in the two RPI M5s and in the end, the RPI products sold themselves!!
By Christmas week I will have followed in yours and Kenny's footsteps and will have A FULL RPI power modded M5.....Make room for another car to run with, Mexico/241/133.....it'll be great....

:launch: :excited:

To be installed:
RPI Headers
RPI Section 1, 2 and 3 (full GT race / straight pipes)
New RPI pulley
RPI Oil cooler
RPI Stage 2 ECU remap
:drive2:

Already completed:
RPI scoops
RPI Block off plates
BMC filters

For Sale Soon:
M5 Meisterschaft section 3 exhaust w/carbon fiber tips
EvoSport underdrive pulley system

It was a pleasure meeting you as well and welcome to the RPI Family!

[Rab Dog]

Well guys sorry to let people down my car died at 451hp @ 6000RPM.... I threw a idle actuator error that is a known recall by BMW.....

Car is going in for software update this week and Nick at VF told me I can come back anytime to re-Dyno again to see if I can break the 500hp mark..

Just to let people know my car on the RPI Dyno 6000Rpm put out 390hp and at 8000rpm put out 470hp...

There is no doubt that I can break the 500hp mark and I will have some proven results when the DME problems are corrected.

[NeRwEEzy]

break 500 for sure. good seeing you today man, and good grubbin too.

[Laidback]

I went on limp mode :( today when i dyno'd )on limp mode (i got 337 rwhp )and from the looks of it, it's from the software, i'll be getting a different software and i will be back to re dyno aswell:D let's set something up over at VF:)Well guys sorry to let people down my car died at 451hp @ 6000RPM.... I threw a idle actuator error that is a known recall by BMW.....

Car is going in for software update this week and Nick at VF told me I can come back anytime to re-Dyno again to see if I can break the 500hp mark..

Just to let people know my car on the RPI Dyno 6000Rpm put out 390hp and at 8000rpm put out 470hp...

There is no doubt that I can break the 500hp mark and I will have some proven results when the DME problems are corrected.

[Laidback]

Btw you guys left early:(

[Rab Dog]

It was not the best of luck day for Dynoing for our cars, but it turned out to be a fantastic meet..

We left early because pretty I dissapointed with my computer problem and had other engangments had to attend in the afternoon.

For sure set up another Dyno day when our cars are back to 100%..

I went on limp mode :( today when i dyno'd )on limp mode (i got 337 rwhp )and from the looks of it, it's from the software, i'll be getting a different software and i will be back to re dyno aswell:D let's set something up over at VF:)

[keang24]

It was not the best of luck day for Dynoing for our cars, but it turned out to be a fantastic meet..

We left early because pretty I dissapointed with my computer problem and had other engangments had to attend in the afternoon.

For sure set up another Dyno day when our cars are back to 100%..

Let me know next time u r going to VF. Sorry, I missed Toys For Tots. I was sick and still sick even now.:o

[BlackOnBlack]

niceeeee