PDA

View Full Version : amp to power pair JL 10W3 subs

john
03-08-2009, 03:23 PM
anyone recommend a good, budget amp to power a pair of JL 10W3s? what else would i need to buy?
Robar
03-08-2009, 04:29 PM
I have JL Audio 500/1 Monoblock Amp that I'm not using. If this works for you, send me a PM.
Laidback
03-09-2009, 11:08 PM
Is that mine that's in the storage? :laughhard:I have JL Audio 500/1 Monoblock Amp that I'm not using. If this works for you, send me a PM.
john
03-09-2009, 11:53 PM
i have a 500/1. i just read that it can handle a 750/1+.. unfortunately, i don't know what these numbers mean. i've never been interested in car audio til last week.
SAKITA
03-10-2009, 12:19 AM
i have a 500/1. i just read that it can handle a 750/1+.. unfortunately, i don't know what these numbers mean. i've never been interested in car audio til last week.

the 500/1 will work fine.
john
03-10-2009, 12:23 AM
the 500/1 will work fine.

thanks

will i need a capacitor? which one would you recommend? anything else i would need?
SAKITA
03-10-2009, 12:38 AM
thanks

will i need a capacitor? which one would you recommend? anything else i would need?

i wouldnt run a cap. not really needed for that small set up.

amp wiring kit and a box built to spec
415Banker
04-06-2009, 02:28 AM
I have a 10W3 myself...I went with a mono hifonics brutus amp that was just for $300...does the job pretty well =)!