PDA

View Full Version : DDM Tuning Springs ?

Daz
07-22-2010, 03:41 PM
Has anyone had any experience with these springs ?
http://www.ddmtuning.com/Products/DDM-Tuning-Sport-Lowering-Springs
Joseph
07-23-2010, 06:45 AM
i just dropped my 95 on these yesterday. it's perfect in the back, but could be lower in the front.
Daz
07-24-2010, 01:58 AM
So how do they feel ? I was told that they are not good !
Joseph
07-24-2010, 02:59 PM
the ride feels the same as rolling on stock springs. i even cut the front one coil and no noticable difference in the ride.
Daz
07-24-2010, 05:25 PM
I had some other guys from other sites say that they would not buy them. But IMHO they said that because of the price. You paid $100 right off of the website right ? Why did you cut them ? Are the not low enough in the front ? Post some pics if you can.
Joseph
07-24-2010, 05:28 PM
yeah, i picked them up at the huntington beach location for about $108 after tax. i cut them as i personally wanted the front a little lower than the rear. but it looks great as is as well. i'll try to get some pics up later.
Daz
07-24-2010, 06:18 PM
I'll make my decision after I see the pics ! Honestly I'm not going to be racing or anything. Maybe take it for some canyonruns up to Bigbear or Crestline but nothing like a timed attack.
Joseph
07-24-2010, 07:05 PM
i won't be racing either, i just like the look of the front a little lower. :)

http://i408.photobucket.com/albums/pp166/jaybegee/DSC_0212.jpg

http://i408.photobucket.com/albums/pp166/jaybegee/DSC_0216.jpg

http://i408.photobucket.com/albums/pp166/jaybegee/DSC_0217.jpg
Laidback
07-24-2010, 08:46 PM
its bouncy?
ooowowizstev
07-24-2010, 10:25 PM
The rear is real low!
Joseph
07-24-2010, 10:41 PM
its bouncy?
it does get a little bouncy on really ****ty roads, but not to the point where it's annoying. other than that, it's all good. :buttrock:
The rear is real low!

it's perfect! :lolhit: this is just a temp. setup until i get some coilovers around x-mas time. :D
Daz
07-25-2010, 12:23 PM
Me Likey !
Joseph
07-25-2010, 02:30 PM
Me Likey !

:thankyou: it's a not a bad setup at all if you want to go the spring route. it's ~1.5-.6" in the front after the cut and 1.75" in the back.
m3luca
08-21-2010, 09:50 PM
DDm tuning is a great compnany but i would not buy their springs again. I would rather save the money for h&r and do it right the first time. MY front ended up being higher than stock, and the rear was dumped. I also had to cut the front and the whole ride was bouncy and the front clunked.

I switched to h&r + koni and the difference was well worth it.
Daz
08-22-2010, 12:07 AM
Cool ! I think I'll be going with your set up too !