tom @ eas
10-21-2010, 12:40 PM
In an ongoing video tutorial series from Macht Schnell, this post will outline the steps needed for installation of the the Macht Schnell Performance Underdrive pulleys on the 2008+ BMW M3:
YouTube - Macht Schnell e9x M3 Performance Underdrive Pulleys Installation Overview
Items needed:
e9x M3 S65 Performance Underdrive Pulley Set (belts included)
Tools needed:
T20 Torx
T25 Torx
T45 Torx
10mm socket
14mm socket
16mm Socket
14mm Wrench (open end)
1-3" drive extension
Standard screwdriver
10mm socket
14mm socket
16mm Socket
1"-3" 3/8" Drive extension (optional)
Standard Screwdriver
Time needed for installation is approximately 60-90 minutes.
Enjoy.
YouTube - Macht Schnell e9x M3 Performance Underdrive Pulleys Installation Overview
Items needed:
e9x M3 S65 Performance Underdrive Pulley Set (belts included)
Tools needed:
T20 Torx
T25 Torx
T45 Torx
10mm socket
14mm socket
16mm Socket
14mm Wrench (open end)
1-3" drive extension
Standard screwdriver
10mm socket
14mm socket
16mm Socket
1"-3" 3/8" Drive extension (optional)
Standard Screwdriver
Time needed for installation is approximately 60-90 minutes.
Enjoy.