OIL TEMPS GETTING HOT - HPF Oil Cooler Group Buy!!

[HPF Chris]

It's that time of year again where temperatures skyrocket!! If you own an E46 M3 than you've probably seen the oil temp gauge needle to the right of the centerline. Don't ruin your engine by overheating it. We've taken the E46 M3 factory oil cooler to a completely new level for all NA, supercharged and turbocharged M3's. This is a plug and play oil cooler that simply bolts right in and replaces the factory oil cooler. The factory oil cooler lines simply connect to our new oil cooler so no need for AN fittings or steel braided lines. This oil cooler also has brackets that are designed to work for NA, supercharged, and even provides mounting locations for the HPF FMIC to connect right up to it for our turbo guys. We also built ducting directly into the oil cooler to bring cool air up from below and to redirect heated air flowing across the radiator around the oil cooler and not through it. This oil cooler design also retains the factory fan shroud, A/C fan, A/C lines and radiator location and configuration. Installation is a snap and the average at home do it yourselfer can install this themselves.

HPF OIL COOLER FEATURES

400% Increase in Core Volume
Factory Core Dimensions: 23" x 1.5" x 2.75" - HPF Core Dimensions: 26" x 4" x 3.6"
Superior Bar and Plate Core Design
Powder Coated Radiator Ducting and Inlet Scoop
Polished Aluminum
Billet End Tanks

GROUP BUY SPECIAL PRICING (SAVE $200)

NA without ducting - $895 - Group Buy Price $695
Supercharged and Turbocharged w/ducting $995 - Group Buy Price $795

HPF OIL COOLERS IN STOCK TODAY
Call now to get on the group buy list AND SAVE $200 (503) 256-5600 or email sales@horsepowerfreaks.com

[M3LIKECHIPS]

Ugh i so want... I like to drive it hard, but this cali heat is rough on it.... If i only had the funds

[HPF Chris]

Originally Posted by M3LIKECHIPS

Ugh i so want... I like to drive it hard, but this cali heat is rough on it.... If i only had the funds

It's a lot cheaper than a new motor.

[Faymester]

Ooo; I want one, I just really don't need one in any way, with the whole living in Canada and all...

[cullen61918]

Originally Posted by HPF Chris

It's a lot cheaper than a new motor.

for sure, do you recommend anything else in addition to this to aid in the cooling of your oil under strenuous driving or will this get the job done tracking your car in the peak heat of the day?

[0-60Motorsports]

Top quality part from HPF

[HPF Chris]

Originally Posted by 0-60Motorsports

Top quality part from HPF

Thanks.

Originally Posted by cullen61918

for sure, do you recommend anything else in addition to this to aid in the cooling of your oil under strenuous driving or will this get the job done tracking your car in the peak heat of the day?

I recommend the high performance fan clutches #1. http://www.horsepowerfreaks.com/part...formance/17618

I also recommend water wetter. We also wire our AC fan to be on all the time.

Chris.

Originally Posted by Faymester

Ooo; I want one, I just really don't need one in any way, with the whole living in Canada and all...

I've heard of plenty of other people in Canada having higher than normal oil temps. Just keep an eye on it.

Chris.

[kautiongsr]

you guys make some nice products.. bump bump

[HPF Chris]

Originally Posted by kautiongsr

you guys make some nice products.. bump bump

Thanks.

Here's our entire product lineup.

http://www.horsepowerfreaks.com/buy/HPF